Takroriy ekinlarni ekish uchun tuproqqa polosali ishlov beruvchi agregatning ishchi organlarini nazariy tadqiq etish

Theoretical study of the working tools of a strip-tillage implement for sowing secondary crops

Article Sidebar

PDF (Uzbek)
Published: 2026-10-16
DOI: https://doi.org/10.66073/ReFocus-Conf/1610125
Keywords:
double cropping, strip tillage, disk, working element, theoretical study, flat disk diameter, disk sharpening angle, disk thickness, disk edge thickness

Main Article Content

Khamidov Nurmukhammad Mukhtarovich
Karakalpak Institute of Agriculture and Agrotechnologies
Tursimuratov Sapar Yeshmuratovich
Karakalpak Institute of Agriculture and Agrotechnologies
Yangiboyev Khursand Hamid uli
Karakalpak Institute of Agriculture and Agrotechnologies
Ataniyazov Alpamis Sabirovich
Karakalpak Institute of Agriculture and Agrotechnologies , Agro-Services Center of the Republic of Karakalpakstan of the National Center for Knowledge and Innovation in Agriculture
Tokhimbetova Jansuliw Kenesbaevna
Karakalpak Institute of Agriculture and Agrotechnologies

Abstract

This article presents a theoretical study of the dimensions of the working tools installed on the strip-till section of a strip-till implement used for planting secondary crops. Based on the results of the theoretical studies, the diameter, sharpening angle, thickness, and edge thickness of the soil-tilling flat coulter disk were determined.

Article Details

Issue

Vol. 1 No. 7 (2026): Development of innovative climate-resilient technologies for monitoring and controlling water use efficiency and the impact of salinization on crop productivity and livelihoods in the Aral Sea region

Section

Development of innovative climate-resilient technologies in agriculture
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Author Biographies

Khamidov Nurmukhammad Mukhtarovich, Karakalpak Institute of Agriculture and Agrotechnologies

Doctor of Philosophy (PhD) in Technical Sciences, Associate Professor

Tursimuratov Sapar Yeshmuratovich, Karakalpak Institute of Agriculture and Agrotechnologies

Doctor of Philosophy (PhD) in Technical Sciences

Yangiboyev Khursand Hamid uli, Karakalpak Institute of Agriculture and Agrotechnologies

Master’s student

Ataniyazov Alpamis Sabirovich, Karakalpak Institute of Agriculture and Agrotechnologies, Agro-Services Center of the Republic of Karakalpakstan of the National Center for Knowledge and Innovation in Agriculture

Master’s student

Tokhimbetova Jansuliw Kenesbaevna, Karakalpak Institute of Agriculture and Agrotechnologies

Student

How to Cite

Khamidov Nurmukhammad Mukhtarovich, Tursimuratov Sapar Yeshmuratovich, Yangiboyev Khursand Hamid uli, Ataniyazov Alpamis Sabirovich, & Tokhimbetova Jansuliw Kenesbaevna. (2026). Theoretical study of the working tools of a strip-tillage implement for sowing secondary crops. Partner Conferences of the International Scientific Journal Research Focus, 1(7), 468-472. https://doi.org/10.66073/ReFocus-Conf/1610125

References

Nurabaev B. U., Xamidov N. M., & Niyetullaev A. Q. (2022). Studying the terms of production and use of a combined seeder. Spectrum Journal of Innovation, Reforms and Development, 9, 402–405.

Хамидов Н. М. Ресурсосберегающие технологии выращивания сельскохозяйственных культур //Традиции и инновации в развитии АПК. – 2019. – С. 511-517.

Abdusalim T. et al. The Results of Experimental Studies on the Determination of the Optimal Values of the Parameters of Levels Mounted on Vegetable Seeding Machine //Eurasian Journal of Engineering and Technology. – 2022. – Т. 5. – С. 17-22.

Хамидов Н. М. Обеспечение эксплуатационной надежности сельскохозяйственной техники //Традиции и инновации в развитии АПК. – 2019. – С. 530-534.

Хамидов Н. Теоретическое исследование устойчивости движения комбинированного машинно-тракторного агрегата //Студенческая наука Подмосковью. – 2018. – С. 601-602.

Хамидов Н. Параметры комбинированного ботвоуборочного агрегата //Международная научно-техническая конференция молодых ученых БГТУ им. ВГ Шухова. – 2018. – С. 2234-2236.

B.U. Nurabaev, N.M. Xamidov and A.S. Baltaniyazov 2024. To the determination of the traction resistance of the experimental working body of the cultivator. European Journal of Agricultural and Rural Education. 5, 1 (Jan. 2024), 22-26. DOI: https://doi.org/10.37547/ijasr-05-01-05

Хамидов Н. М. Актуальные проблемы и перспективы агроинженерных исследований //Молодой ученый. – 2019. – №. 15. – С. 74-76.

Eshdavlatov, E., Eshdavlatov, A., Shomirzaev, M., & Xamidov, N. (2024). Physical-mechanical properties of onion seeds and soil. In 23rd International Scientific Conference “Engineering for Rural Development”: proceedings:[Jelgava, Latvia], May 22-24, 2024 (Vol. 23, pp. 507-512). DOI: 10.22616/ERDev.2024.23.TF095 DOI: https://doi.org/10.22616/ERDev.2024.23.TF095

Mamatov, F.; Syromiatnykov, Y.; Eshdavlatov, A.; Ibragimov, A.; Snitko, V.; Khamidov, N.; Abdurakhmanov, A.; Tovashov, R.; Yuldoshev, S.; Ravshanov, S.; et al. Integrated Multi-Row Onion Production Under Contrasting Seasonal Conditions: Seeder Optimization, Nutrient Management, Crop Protection, and EIQ-Adjusted Sustainability. Agriculture 2026, 16, 1716. https://doi.org/10.3390/agriculture16161716 DOI: https://doi.org/10.3390/agriculture16161716

Кушнарев А.С. Дискатор – новое почвообрабатывающее орудие, обеспечивающее переход от традиционной технологии производства сельскохозяйственной продукции к энергосберегающей технологии No–till.–Белая Церковь, 2010. – 60 с.

Руденко Н.Е., Кулаев Е.В. Механизация растениеводства // Ставрополь: ФГБОУ ВПО Ставропольский государственный аграрный университет, 2014. – 236 с.

Imomqulov Q.B., Muqimova D.K. Shudgorlangan yerlarni ekishga tayyorlashda qo‘llaniladigan mashina ponasimon diskning parametrlarini asoslash // Farg‘ona politexnika instituti ilmiy-texnika jurnali. – Farg‘ona, 2018. - №1. – B. 148-150.

Синеоков Г.Н., Панов И.М. Теория и расчет почвообрабатывающих машин. – М.: Машиностроение. 1977. – 328 с.