ANALYSIS OF THE IONIC CONDUCTIVITY OF PEO–PC–EC/AMMONIUM IODIDE POLYMER ELECTROLYTE AS A RELATIONSHIP WITH SALT MASS

Article Sidebar

PDF (Uzbek)
Published: 2025-12-05
DOI: https://doi.org/10.66073/ReFocus-Conf/607
Keywords:
polymer electrolyte, ammonium iodide, ionic conductivity, salt mass, PEO–PC–EC, organic solar cell, DSSC, ion pairing, electrical properties, optimal concentration

Main Article Content

Nishonov Azizbek Nazirjon oglu
Teacher at the University of Business and Science Institute.

Abstract

This paper studies the ionic conductivity of a PEO–PC–EC/ammonium iodide (NH₄I)-based polymer electrolyte for organic solar cells (DSSC). The study analyzes how the ionic conductivity changes with the change in the mass fraction of ammonium iodide in the electrolyte. The experiments show that an increase in the salt content initially increases the conductivity by increasing the number of ions, but after a certain limit, the conductivity decreases due to ion pairing. The results obtained are important for determining the optimal salt concentration of polymer electrolytes and improving the efficiency of solar cells.

Article Details

Issue

Vol. 1 No. 1 (2025): Republican scientific-practical conference on “New Paradigms in Science, Technology and Education”

Section

Articles
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

Nishonov Azizbek Nazirjon oglu. (2025). ANALYSIS OF THE IONIC CONDUCTIVITY OF PEO–PC–EC/AMMONIUM IODIDE POLYMER ELECTROLYTE AS A RELATIONSHIP WITH SALT MASS. Partner Conferences of the International Scientific Journal Research Focus, 1(1), 1062-1064. https://doi.org/10.66073/ReFocus-Conf/607

References

[1] O’Regan, B., & Grätzel, M. (1991). A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO₂ films. Nature, 353, 737–740.

[2] Gong, J., Liang, J., & Sumathy, K. (2012). Review on dye-sensitized solar cells (DSSCs): Fundamental concepts and novel materials. Renewable and Sustainable Energy Reviews, 16(8), 5848–5860.

[3] Arico, A. S., Bruce, P., Scrosati, B., Tarascon, J. M., & Van Schalkwijk, W. (2005). Nanostructured materials for advanced energy conversion and storage devices. Nature Materials, 4(5), 366–377.

[4] Stephan, A. M. (2006). Review on gel polymer electrolytes for lithium batteries. European Polymer Journal, 42(1), 21–42.

[5] Selvasekarapandian, S., et al. (2007). Thermal and electrical properties of PEO:NH₄I polymer electrolytes. Journal of Physics and Chemistry of Solids, 68(3), 567–573.

[6] Rajendran, S., & Mahendran, O. (2002). AC impedance studies in PEO-based polymer electrolytes. Solid State Ionics, 148(3-4), 377–385.

[7] Choi, J., & Kim, D. (2020). Optimization of salt concentration in polymer electrolytes for DSSC applications. Solar Energy Materials & Solar Cells, 214, 110587.

[8] O’Regan, B., & Grätzel, M. (1991). A low-cost, high-efficiency solar cell based on dye-sensitized colloidal TiO₂ films. Nature, 353, 737–740.

[9] Gong, J., Liang, J., & Sumathy, K. (2012). Review on dye-sensitized solar cells (DSSCs): Fundamental concepts and novel materials. Renewable and Sustainable Energy Reviews, 16(8), 5848–5860.

[10] Stephan, A. M. (2006). Review on gel polymer electrolytes for lithium batteries. European Polymer Journal, 42(1), 21–42.

[11] Selvasekarapandian, S., Kuwata, N., Kawamura, J., & Hattori, T. (2007). Thermal and electrical properties of PEO: NH₄I polymer electrolytes. Journal of Physics and Chemistry of Solids, 68(3), 567–573